Back-primed field cuts, documented fastener schedules, correct butt joint clearances, proper sill plate clearance to grade — these are the installation details most contractors skip because they add time. They're the details that protect the material warranty and determine whether your fiber cement siding performs for 30 years or 15. Our Midlothian crews skip none of them.

Our Midlothian, IL specialists bring manufacturer certification, real diagnostic tools, and written guarantees to every Fiber Cement Siding project — not just availability and a truck.
Preferred Contractor status means your 30-year material warranty is fully in force. We submit the installation documentation to the manufacturer at project completion.
Every field cut is back-primed with alkyd primer within 30 minutes of cutting — not at end of day. Unprimed cut edges are the most common moisture entry point on fiber cement installations.
Nail type, length, spacing, and penetration depth are logged per manufacturer requirements and included in your close-out package — documentation that supports warranty claims.
All cutting is done at a designated outdoor station away from HVAC intakes. Crews wear P100 respirators. We follow OSHA silica exposure guidelines on every project.
Every service below is performed by trained specialists — not generalists covering a broad menu. Our Midlothian, IL team focuses on Fiber Cement Siding specifically, and that focus shows in the results.
Smooth, wood-grain, and rough-sawn HardiePlank profiles installed to James Hardie's prescriptive requirements: correct clearances to grade and roofing, approved fastener type and schedule, required joint flashing at horizontal butt joints, and all field cuts back-primed.

Large-format vertical panels require correctly located blocking behind every vertical seam and Z-flashing at all horizontal transitions. We spec and install the blocking schedule before any panels go on.

Individual shingle panels are fastened at the exact nailhead position specified by the manufacturer and backed with secondary water-resistive layer at every course break. Gable ends and dormers done correctly look nothing like budget shake.

Factory-applied ColorPlus finish carries its own warranty and lasts significantly longer than field paint when installed by a Preferred Contractor. We handle factory-painted material carefully — no face nailing, correct storage before install, edge sealing at every field cut.

Complete tear-off, substrate repair, housewrap replacement, and new fiber cement system. Silica cutting controls in place throughout. Full fastener documentation produced at project close.

HardieTrim resists the moisture-driven cupping and rot that eventually afflicts wood trim at ground level and roof junctions. Integrated with wall panels at required grade clearance and back-primed at every cut.

Our Midlothian, IL team follows the same documented process on every project — so you know what to expect at every stage.
We evaluate substrate flatness, existing moisture content, wall height, and sun exposure to specify the correct panel thickness, fastener schedule, and trim system for your Midlothian, IL property.
Fiber cement is ordered by exact linear footage with waste factor. Material is stored flat under cover on-site — standing panels on edge before installation creates stress fractures at butt joints.
Field cutting is done at a dedicated outdoor cutting station with dust controls active. All cut edges are back-primed with alkyd primer within 30 minutes of cutting before any panel is carried to the wall.
Completed fastener log submitted to manufacturer at project close. Material warranty registered in your name under the Preferred Contractor program. Full close-out package delivered at final walkthrough.
The cutting station away from our HVAC intake, the P100 respirators, the dust controls — every silica protection measure I'd read about was in place. That's not what you see from every crew offering fiber cement.
We chose HardiePlank for the fire resistance rating and the 30-year warranty. Forge Siding handled the Preferred Contractor registration, so the full material warranty is in force. Other quotes were cheaper — none included a certified installer.
Fastener log in the close-out package was something I didn't know to ask for. When the manufacturer warranty question comes up at resale, that documentation is going to matter.
The HardieTrim integration — transitions at every window, the corners, the roofline — is precise. No caulk bridging poor fits, no compression joints. Clean, tight, and clearly done by people who've installed this system many times.
Our Midlothian-based team handles every Fiber Cement Siding project in the service area with fast dispatch, local familiarity, and practical ability to return quickly for any follow-up.
Currently active in: 60445 and surrounding areas
One call reaches a crew that measures, specifies, and prices every fiber cement project by the detail — not by the square foot guess.
📞 +1-844-782-0929 — Get a Quote